Supamastic 4 Litre

Davco Supamastic can be used for residential internal thin bed wall applications with porous tiles (>3% absorption) on porous substrates. Davco Supamastic can be used for residential internal floor tiling application with porous tiles (>3% absorption) on porous substrates.

Suitable substrates include:

• Fibre cement sheet
• Plasterboard
• Ceramic tile underlay
• Rendered blockwork & brickwork
• Davco K10 Plus waterproof membrane (drying times will be greatly extended over waterproof membrane)

Suitable Tile Types include:

• Ceramic
• Porcelain tiles*
• Mosaics

* suitable for porcelain tiles over porous substrates such as fibre cement sheet, tile shall be no greater than 300×300 size.

Layer Thickness

Layer thickness shall be no greater than 4mm

Ambient Air Temperature

Min +5°C to Max 35°C

Substrate Temperature

Min +5°C to Max 35°C

Open Time

30 Minutes

Adjustability Time

45 Minutes

Applied Product Ready For Use

Set time before grouting – 24 Hours

Set time before dry area service – 48 hours

Set time before wet area service – 7 days

• All measurements are taken at 22°C & 50% relative humidity. Specifications vary according to site conditions and should be taken as a guide only.
• Cool or cold weather will extend drying times of premixed adhesives
• Non porous tiles will greatly extend drying time of adhesive
• Drying time over membranes will be greatly extended

Consumption

4L will cover approx 3m² with a 6mm notch trowel.

15L will cover approximately 11m² with a 6mm notch trowel.