Liquid Nails Construction Adhesive 100g

Selleys Liquid Nails Original is a high strength multipurpose construction adhesive that forms a strong and lasting bond on most building substrates.

• Strong bond – which is flexible enough to respond to movement allowing a strong bond to maintained.
• Adheres well to wet and dry timber, so there is no need to wait for the timber to dry.
• Easily extruded and easy to use at low temperatures.
• Paintable when dry, to give you a neat, quality finished job.
• Doesn’t drip, sag or string, so there is less mess when you are using the product.
• Bridges gaps on rough and ill fitting construction materials
• Meets requirements specified by Australian Standard AS 2329-1999.
• Adheres to wet/poor seasoned timber.
• Bridges Gaps up to 9mm
• When applying to one surface, ensure sufficient Liquid Nails Original is used so that some adhesive extrudes out when surfaces are brought together then wipe off excess if necessary.  If glue is not visible, then insufficient contact may not have been made between the surfaces and a weak joint may result.
• Liquid Nails Original should always be used in conjunction with mechanical fasteners in structural, critical or high stress applications.
• Liquid Nails Original is sometimes called Liquid Nails (Solvent based) to differentiate it from the other Liquid Nails products.
• Liquid Nails Original shrinks slightly on curing.
• Cured Liquid Nails Original residues can be removed by holding a rag soaked in mineral turps against the residue, then rubbing the residue once softened. Mineral turps penetrates in this way at approximately 1 mm per hour.
• To eliminate squeaks in tongue and groove flooring, apply a bead of Liquid nails into the groove or each board when installing.

Where can liquid nails be used?

• Sheet flooring to joists
• Metal or aluminium door strips to floors or walls
• Timber or fibre cement sheeting to cement block or brick walls
• Masonite to timber
• Wallboard or panelling to wood or metal frames
• Cork tiles to timber, fibro or plaster
• Tempered hardboard to floorboards
• To eliminate the squeaks in tongue and groove boards

What materials is it suitable for?

• Timber
• Plasterboard
• MDF
• Particleboard
• Masonry
• Concrete
• Tiles
• Cermaics
• Metals
• Rubber
• Glass
• Plastics (Pre test plastics to determine compatibility. Not for use on polyethylene, polypropylene, Teflon, silicone or polystyrene)