Selleys Liquid Nails Fast Grab is a high strength construction adhesive that provides strong initial holding power. The water-based formulation is low odour and allows for easy water clean up.
- Fast grab minimises the need to support joints while product cures.
- Strong bond – which is flexible enough to respond to building movement, allowing a strong bond to be maintained over time.
- Easily cleans up with water.
- Low odour, low toxic, low VOC (Meets GBCA VOC limits for multipurpose construction adhesives), less harmful to the environment
- Paintable after 12 hours
- Cures and works best on porous surfaces, which makes it ideal for sticking wall panels to masonry.
- Doesn’t drip, sag or string, so there is less mess when you are using the product
- Meets or exceeds requirements specified by Australian Standard AS 2329-1999.
- Bridges gaps, up to 9mm, on rough and ill fitting construction material
- Faster curing is achieved when at least one surface is porous.
- Liquid Nails Fast Grab should always be used in conjuction with mechanical fasteners in structural, critical or high stress applications.
- Usually a strong bond is achieved in 24 hours and continues to strengthen over 3 days. Expect longer times for less porous surfaces and in cold weather.
- Bridges gaps up to 9mm
- Suitable for sheltered exterior applications
- Paintable after 12 hours
- Cured Liquid Nails Fast Grab residues can be removed by rubbing with Acetone. This may take a few minutes to penetrate.
- Liquid Nails Fast Grab shrinks slightly on curing.
- High humidity and low temperatures can both significantly slow the cure rate of Liquid Nails Fast Grab especially when used on non-porous surfaces.
- When applying to one surface, ensure sufficient Liquid Nails Fast is used so that some adhesive extrudes out when surfaces are brought together. Then wipe off excess if necessary. If glue is not visible, then sufficient contact may not have been made between the surfaces and a weak joint may result.
- Uncured product may be removed with water.
- Cured product can be removed by scraping or sanding.
Where can liquid nails fast be used?
- Timber panelling to walls
- Skirting boards
- Styrene foam panels and blocks
- Architraves
- Particle board to masonry surfaces
- Tasks where nailing is not desirable
What materials is this suitable for?
- MDF
- Particleboard
- Timber
- Plasterboard
- Styrene Foam
- Masonry
- Concrete
- Tiles
- Ceramics
- Metals
- Rubber
- Glass
- Most plastic (Not for use on polyethylene, polypropylene, Teflon or silicone) – pre test plastic to determine compatibility
Reviews
There are no reviews yet.